Industrial Aluminium Alloy Profiles Electrial aluminium solar frame
for sliding windoor profile
|Description||Industrial Aluminium Alloy Profiles Electrial Aluminium Solar Frame
For Sliding Windoor Profile|
|Implements National Standard||GB5237.6-2012|
|Material Thickness(t)||t=1.0 / 1.1 / 1.2 mm|
|Surface Texture||Anodizing; Electrolytic coated; Power coated; PCDF coated; Timben
|Material||Aluminum Alloy 6063, 6060. 6005, 6005A, etc|
|Annealing Treatment||F, T1, T4, T5, T6, T61, T64, etc|
|Longitudinal anti-shearing value||>=24N/mm|
|With both heat insulation system, the products are environment
protected and with corresponding glass, the value
|Length||Normal length 6m|
1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Providing colorful products with various mechanical performances to
adapt all kinds of architectural styles
Aluminum profile doors and Windows to identify six laws
How to identify the advantages and disadvantages of aluminum
profile doors and Windows, there are six main aspects to be
referenced in material materials:
1. Thickness: the aluminum alloy sliding door has 70 series and 90
series, the aluminum alloy sliding door inside the house USES 70
series. The number of series represents the number of millimeters
in the thickness of the frame. Aluminum alloy push-pull window has
55 series, 60 series, 70 series, 90 series 4 kinds. Series
selection should be based on the window hole size and local wind
pressure. Used as a closed balcony
The aluminum alloy push-pull window should not be less than 70
2. Strength: the tensile strength should be up to 157 newtons per
square meter, and the yield strength should be 108 newtons per
square millimeter. When you choose, you can use your hand to bend
the profile properly. After you release it, you should be able to
recover the original shape.
3. Chroma: the color of the same aluminium profile should be
consistent. If the color difference is obvious, it should not be
4. Flatness: check the aluminum alloy profile surface and should
not be dented or drum out.
5. Gloss: aluminum alloy doors and Windows avoid surface bubbles
(white spots) and grey slag (black dots), as well as obvious
defects such as cracks, burrs and peeling.
6. Oxidation: the oxide film thickness should be 10 microns. When
choose and buy, can be on the profile surface light, see whether
the oxide film of its surface can erase.
Corporate Introduction :
Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10
(Sanjiang market) of Leping Town, Sanshui District, Foshan. The
company was founded in 1997. It is a comprehensive and large-scale
aluminum profile enterprise integrating the research and
development, production and sales of aluminum alloy profiles. The
company is leading the "Hongying" brand. Strong comprehensive
strength and excellent service make Yong long "Hongying" sell well
all over the country and exported to Southeast Asia, Europe, South
America and many other countries.
The company has 900 employees, including 120 high and intermediate
engineering technology and management personnel, with advanced and
perfect design, production, testing and testing methods as well as
perfect sales network and after-sales service system. The products
sell well in more than 10 national and foreign ports, Australia and
Please tell us the information below, and we will give the best
suggestion to you !
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
3. Which color you want or tell us the architectural style you
4. Purchase quantity. It will convenient us to give you the best
Welcome to visit our company !
Choose us & contact us !