Champagne color Aluminum extrusion profile , curtain wall profile
|Description||Champagne color Aluminum extrusion profile,curtain wall profile|
|Material Thickness(t)||t=1.0 / 1.2 / 1.4|
|Material||Aluminum Alloy 6063, 6061|
|Color||Green, Grey, Black, White, (RAL series)etc.|
Mill finish, anodized, powder coated, electrophoresis,
sand balsting etc.and depend on customer’s demand.
|Shape||Square, Round, Flat, Oval, and according to customer's drawing.|
|Length||Normal length=5.95 m|
Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc.
1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles
The window and Windows of the bridge are installed
Installation procedure: the window frame is in place, the frame is fixed to the box, the
hardware fittings, the glass, the cleaning.
1: Each floor window frame installation should be horizontal and
vertical, horizontal and horizontal, straight up and down.
2: When the frame is fixed with the wall, the frame is fixed, the
frame is fixed and the plastic expansion bolt is fixed.
3: The inner cavity of the expansion seam between the frame and the
hole is filled with the elastic material such as closed-pore foam
plastic and foaming agent, and the surface is sealed with sealant.
3 disheated aluminum alloy doors and Windows installation process:
3.1: doors and Windows installation must be strong, the number of
embedded parts, the location, buried connection methods must comply
with the design requirements, used for fixed every reinforced steel
fasteners must not be less than 3, the spacing should be no greater
than 300 mm, is apart from the steel end should be no greater than
100 mm; In addition to stainless steel, the surface of reinforced
section, fasteners and hardware is treated with corrosion resistant
3.2: The installation of doors and Windows and glass shall be
installed after the wall wet work method is completed and hardened.
When the doors and Windows installation, the ambient temperature
should not be lower than 5 ℃.
3.3: When the window is fixed with the wall, the frame should be
fixed and the border fixed. The concrete hole should be fixed by a
nail or plastic expansion bolt; The brick wall hole should be fixed
with plastic expansion bolts and not fixed in the place of brick.
The holes of the embedded iron shall be fixed by the method of
welding, or by the fasteners on the pre-buried parts, and then the
fasteners shall be fixed.