Aluminum window parts best for aluminium sliding windows extrusion
|Product||Aluminum window parts best for aluminium sliding windows extrusion
|Material||Alloy 6060, 6061, 6063, etc.|
|Color||Different colors available (black, blue, green, champagne, bronze,
golden, vermillion, etc.)|
|Surface treatment||Mill finish, anodized, electrophoretic coating, powder coating,
thermal break, wood grain/wood-in-shift, etc.|
|Mould||Based on your drawing or use our mould free|
|Sample time||Usual practice: within 15 working days against payment|
|Usages||Windows, doors, curtain wall, solar panel, LED panel, heat sink,
|Certified||ISO9001-2008 Quality System,|
Knowledge of aluminum alloy doors and Windows
There are six main aspects of material materials that can be
1: Thickness: aluminum alloy sliding door has 70 series, 90 series
two kinds, the aluminum alloy sliding door inside the house USES 70
series can. The number of series indicates the size of the frame
thickness. Aluminium alloy push window has 55 series, 60 series, 70
series, 90 series four kinds. The series selection should be based
on the size of the window and the local wind pressure. The
aluminium alloy that is used as enclosed balcony should not be less
than 70 series.
2: Strength: the tensile strength should be up to 157 newtons per
square meter, and the yield strength should be 108 newtons per
square millimeter. When choosing, the hand should be moderately
bent, and should be able to return to the original.
3: Colour degree: same aluminum profile colour should be
consistent, if chromatism is obvious, be unfavorable choose and
4: Flatness: check the aluminum alloy section surface, should not
dent or drum out.
5: Gloss: aluminum alloy doors and Windows avoid open bubbles
(white spots) and ash (black dots), as well as obvious defects such
as cracks, burrs and peeling.
6: Oxidation: the thickness of the oxide film should be 10 microns.
When choose and buy, can be on the surface of profile light, see if
the oxidation film of its surface can be erased.
Corporate Introduction :
Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10
(Sanjiang market) of Leping Town, Sanshui District, Foshan. The
company was founded in 1997. It is a comprehensive and large-scale
aluminum profile enterprise integrating the research and
development, production and sales of aluminum alloy profiles. The
company is leading the "Hongying" brand. Strong comprehensive
strength and excellent service make Yong long "Hongying" sell well
all over the country and exported to Southeast Asia, Europe, South
America and many other countries.
The company has 900 employees, including 120 high and intermediate
engineering technology and management personnel, with advanced and
perfect design, production, testing and testing methods as well as
perfect sales network and after-sales service system. The products
sell well in more than 10 national and foreign ports, Australia and
Please tell us the information below, and we will give the best
suggestion to you !
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
3. Which color you want or tell us the architectural style you
4. Purchase quantity. It will convenient us to give you the best
Welcome to visit our company !
Choose us & contact us !