Shape Custom Machined Aluminium Profiles Anodized Parts For Machine
|Description||Shape Custom Machined Aluminium Profiles Anodized Parts For Machine|
|Material Thickness(t)||t=1.0 / 1.2 / 1.4|
|Material||Aluminum Alloy 6063, 6063A, 6060, 6061|
|Color||Green, Grey, Black, White, (RAL series)etc.|
|Surface Treatment||Matte, Semi-glossy, Highly glossy|
|Length||Normal length=6 m|
1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles
Process specification for oxidizing production of aluminium
1: In the room temperature acid solution, the time is 2 - 4
minutes, the H2SO4 concentration is 140-160 g/l;
2: Remove the residual water and then clean in the clean water tank
for 1-2 minutes
Abrasive polishing process
1: Remove the oil and then clean it in the clean water tank and
then enter the acid etching tank;
2: Process parameters: NH4HF4 concentration 30-35 g/l, temperature
35-40 DEG C, pH value 2.8-3.2, acid etching time 3-5 minutes;
3: After etching, the water is washed into the caustic etching tank
after two washing.
Alkaline wash process
1: Process parameters: free NaOH 30-45 g/l, total alkali 50-60 g/l,
alkali etching agent 5-10 g/l, AL 3+ 0-15 g/l, temperature 35-45
DEG C, sand alkali etching time 30-60 seconds;
2: Lift the rack and pour the solution into the water tank and
3: Check the surface quality after cleaning. When there is no
corrosion mark, no sundries and coagulate surface, you can enter
the light out process.
The light craft
1: Process parameters: H2SO4 concentration of 160-220 g/l, HNO3
amount or 50 g/l -100 g/l, temperature, room temperature, light
time of 2-4 minutes;
2: Lift the frame and pour the residual liquid quickly into the
water tank for 1-2 minutes, then add second clean water tank for
3: After the two cleaning is finished, the aluminum wire should be
clamped tightly to ensure good contact in the oxidation process.
One end of the ordinary material clamp is tight with the aluminum
wire, the coloring material and the electrophoresis material should
be clamped tightly at both ends of the binding frame.
Corporate Introduction :
Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10
(Sanjiang market) of Leping Town, Sanshui District, Foshan. The
company was founded in 1997. It is a comprehensive and large-scale
aluminum profile enterprise integrating the research and
development, production and sales of aluminum alloy profiles. The
company is leading the "Hongying" brand. Strong comprehensive
strength and excellent service make Yong long "Hongying" sell well
all over the country and exported to Southeast Asia, Europe, South
America and many other countries.
The company has 900 employees, including 120 high and intermediate
engineering technology and management personnel, with advanced and
perfect design, production, testing and testing methods as well as
perfect sales network and after-sales service system. The products
sell well in more than 10 national and foreign ports, Australia and
Please tell us the information below, and we will give the best
suggestion to you !
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
3. Which color you want or tell us the architectural style you
4. Purchase quantity. It will convenient us to give you the best
Welcome to visit our company !
Choose us & contact us !